Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
post
Jump To

Aimovig

  • Generic Name: erenumab-aooe injection, for subcutaneous use
  • Brand Name: Aimovig
  • Drug Class: CGRP Monoclonal Antibodies
Reviewed by Medsayfa.com Last updated June 04, 2024

Patient Information

Instructions for Use

AIMOVIG
(AIM-oh-vig)
 (erenumab-aooe)  injection, for subcutaneous Use

Single-Dose Prefilled SureClick® Autoinjector  70 mg/mL

This Instructions for Use contains information on how to inject AIMOVIG.

Guide to parts

Single-Dose Prefilled SureClick® Autoinjector  70 mg/mL - Illustration-Aimovig

Important: Needle is inside the green safety guard.

Important

Important Information You Need to Know Before Injecting AIMOVIG:

  • It is important that you Do not try to give yourself or someone else the injection unless you have received training from your healthcare provider.

Storing your AIMOVIG SureClick autoinjector:

  • Keep the autoinjector and all medicines out of the reach of children.
  • Keep the autoinjector in the original carton to protect from light.
  • Keep the autoinjector in the refrigerator at 36°F to 46°F (2°C to 8°C).
  • After removing from the refrigerator, the autoinjector may be kept at room temperature between 68°F to 77°F (20°C to 25°C) and must be used within 7 days. Do not put it back in the refrigerator after it has reached room temperature.
  • Throw away AIMOVIG that has been left at room temperature for more than 7 days.
  • Do not store the autoinjector in extreme heat or cold. For example, avoid storing the autoinjector in your vehicle’s glove box or trunk.
  • Do not freeze or use the autoinjector if it has been frozen.

Using your AIMOVIG SureClick autoinjector:

  • Do not use the autoinjector after the expiration date on the label.
  • Do not shake the autoinjector.
  • Do not remove the white cap from the autoinjector until you are ready to inject. Leaving the cap off for more than 5 minutes can dry out the medicine.
  • Do not use the autoinjector if it has been dropped on a hard surface. Part of the autoinjector may be broken even if you cannot see the break. Use a new autoinjector, and call 1-800-77-AMGEN (1-800-772-6436).
  • The autoinjector is not made with natural rubber latex.
  • For more information or help, contact your healthcare provider, visit www.aimovig.com or call 1-800-77-AMGEN (1-800-772-6436).

Step 1: Preparing to inject AIMOVIG

1A. Remove the autoinjector from the carton.

Carefully lift the autoinjector straight up out of the carton.

Before you inject, always check the label of your autoinjector to make sure you have the correct medicine and the correct dose of AIMOVIG.

Wait at least 30 minutes for the autoinjector to reach room temperature before injecting.

This is important for administering the entire dose and helps minimize discomfort. AIMOVIG may take longer to inject if it has not reached room temperature. Do not heat the autoinjector. Let it come to room temperature naturally.

AIMOVIG (erenumab-aooe) injection, for subcutaneous use Structural Formula - Illustration
  • Do not put the autoinjector back in the refrigerator after it has reached room temperature.
  • Do not try to warm the autoinjector by using a heat source such as hot water or microwave.
  • Do not leave the autoinjector in direct sunlight.
  • Do not shake the autoinjector.

Do not remove the white cap from the autoinjector yet.

1B. Inspect the AIMOVIG SureClick autoinjector.

Green safety guard (needle inside)

Inspect the AIMOVIG SureClick autoinjector - Illustration

Make sure the medicine in the window is clear and colorless to slightly yellow.

  • Do not use the autoinjector if the medicine is cloudy or discolored or contains flakes or particles.
  • Do not use the autoinjector if any part appears cracked or broken.
  • Do not use the autoinjector if the autoinjector has been dropped.
  • Do not use the autoinjector if the white cap is missing or not securely attached.
  • Do not use the autoinjector if the expiration date printed on the label has passed.

In all cases, use a new autoinjector, and call 1-800-77-AMGEN (1-800-772-6436).

1C. Gather all materials needed for your injection.

Wash your hands thoroughly with soap and water.

On a clean, well-lit work surface, place the:

  • New autoinjector
  • Alcohol wipes
  • Cotton balls or gauze pads
  • Adhesive bandages
  • Sharps disposal container (see Step 4: Finish)
Sharps disposal container - Illustration-Aimovig

1D. Prepare and clean your injection site.

Only use these injection sites:

  • Thigh
  • Stomach (abdomen), except for a 2 inch area right around your navel (belly button)
  • Outer area of upper arm (only if someone else is giving you the injection)

Clean your injection site with an alcohol wipe. Let your skin dry.

  • Do not touch this area again before injecting.
  • Do not inject into areas where the skin is tender, bruised, red, or hard. Avoid injecting into areas with scars or stretch marks.
  • Avoid injecting directly into raised, thick, red, or scaly skin patch or lesion.
Clean your injection site with an alcohol wipe - Illustration

Step 2: Get ready

2A. Pull the white cap straight off, only when you are ready to inject.

Do not leave the white cap off for more than 5 minutes. This can dry out the medicine.

Pull the white cap straight off, only when you are ready to inject - Illustration-Aimovig

It is normal to see a drop of liquid at the end of the needle or green safety guard.

  • Do not twist, bend, or wiggle the white cap.
  • Do not put the white cap back onto the autoinjector.
  • Do not put fingers into the green safety guard.
  • Do not remove the white cap from the autoinjector until you are ready to inject.

If you are unable to inject, please contact your healthcare provider.

2B. Create a firm surface at the selected injection site (thigh, stomach, or outer areas of the upper arm), by using either the Stretch method or the Pinch method.

Stretch Method

Stretch Method - Illustration

Stretch the skin firmly by moving your thumb and fingers in opposite directions, creating an area about 2 inches wide.

OR

Pinch Method

Pinch method - Illustration-Aimovig

Pinch the skin firmly between your thumb and fingers, creating an area about 2 inches wide.

Important: Keep skin stretched or pinched while injecting.

Step 3: Inject

3A Keep holding the stretched or pinched skin. With the white cap off, put the green safety guard on your skin at 90 degrees. The needle is inside the green safety guard. Do not touch the purple start button yet.

Keep holding the stretched or pinched skin - Illustration-Aimovig

3B. Firmly push down the autoinjector onto skin until the autoinjector stops moving.

Firmly push down the autoinjector onto skin until the autoinjector stops moving - Illustration

Important: You must push all the way down but do not touch the purple start button until you are ready to inject.

3C. When you are ready to inject, press the purple start button. You will hear a click.

When you are ready to inject, press the purple start button - Illustration

3D. Keep pushing the autoinjector down on your skin. Then lift your thumb while still holding the autoinjector on your skin. Your injection could take about 15 seconds to complete.

Keep pushing the autoinjector down on your skin - Illustration

Note: After you remove the autoinjector from your skin, the needle will be automatically covered.

After you remove the autoinjector from your skin, the needle will be automatically covered - Illustration Aimovig

Important: When you remove the autoinjector, if the window has not turned yellow, or if it looks like the medicine is still injecting, this means you have not received a full dose. Call your healthcare provider immediately.

Step 4: Finish

4A. Throw away the used autoinjector and the white cap.

Throw away the used autoinjector and the white cap - Illustration

Put the used autoinjector and white cap in an FDA-cleared sharps disposal container right away after use. Do not throw away (dispose of) the autoinjector or white cap in your household trash.

If you do not have an FDA-cleared sharps disposal container, you may use a household container that is:

  • Made of a heavy-duty plastic,
  • Can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out,
  • Upright and stable during use,
  • Leak-resistant, and
  • Properly labeled to warn of hazardous waste inside the container.

When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state that you live in, go to the FDA’s website at: http://www.fda.gov/safesharpsdisposal.

Do not dispose of your used sharps disposal container in your household trash unless your community guidelines permit this. Do not recycle your used sharps disposal container.

  • Do not reuse the autoinjector.
  • Do not recap the autoinjector or put fingers into the green safety guard.

Important: Always keep the sharps disposal container out of the reach of children.

4B. Check the injection site.

If there is blood, press a cotton ball or gauze pad on your injection site. Apply an adhesive bandage if needed.

Do not rub the injection site.

Commonly asked questions

What will happen if I press the purple start button before I am ready to do the injection on my skin?

Even when you press the purple start button, the injection will only happen when the green safety guard is also pushed into the autoinjector.

Can I move the autoinjector around on my skin while I am choosing an injection site?

It is okay to move the autoinjector around on the injection site as long as you do not press the purple start button. However, if you press the purple start button and the green safety guard is pushed into the autoinjector, the injection will begin.

Can I release the purple start button after I start my injection?

You can release the purple start button, but continue to hold the autoinjector firmly against your skin during the injection.

Will the purple start button pop up after I release my thumb?

The purple start button may not pop up after you release your thumb if you held your thumb down during the injection. This is okay.

What do I do if I did not hear a second click?

If you did not hear a second click, you can confirm a complete injection by checking that the window has turned yellow.

Whom do I contact if I need help with the autoinjector or my injection?

A healthcare provider familiar with AIMOVIG should be able to answer your questions. For more information, visit www.aimovig.com or call 1-800-77-AMGEN (1-800-772-6436).

Instructions for Use

AIMOVIG®
(AIM-oh-vig)  (erenumab-aooe)  injection, for subcutaneous use

Single-Dose Prefilled SureClick® Autoinjector 140 mg/mL

This Instructions for Use contains information on how to inject AIMOVIG.

Guide to parts

Single-Dose Prefilled SureClick® Autoinjector 140 mg/mL - Illustration

Important: Needle is inside the yellow safety guard.

Important

Important Information You Need to Know Before Injecting AIMOVIG:

  • It is important that you Do not try to give yourself or someone else the injection unless you have received training from your healthcare provider.

Storing your AIMOVIG SureClick autoinjector

  • Keep the autoinjector and all medicines out of the reach of children.
  • Keep the autoinjector in the original carton to protect from light.
  • Keep the autoinjector in the refrigerator at 36°F to 46°F (2°C to 8°C).
  • After removing from the refrigerator, the autoinjector may be kept at room temperature between 68°F to 77°F (20°C to 25°C) and must be used within 7 days. Do not put it back in the refrigerator after it has reached room temperature.
  • Throw away AIMOVIG that has been left at room temperature for more than 7 days.
  • Do not store the autoinjector in extreme heat or cold. For example, avoid storing the autoinjector in your vehicle’s glove box or trunk.
  • Do not freeze or use the autoinjector if it has been frozen.

Using your AIMOVIG SureClick autoinjector

  • Do not use the autoinjector after the expiration date on the label.
  • Do not shake the autoinjector.
  • Do not remove the orange cap from the autoinjector until you are ready to inject. Leaving the cap off for more than 5 minutes can dry out the medicine.
  • Do not use the autoinjector if it has been dropped on a hard surface. Part of the autoinjector may be broken even if you cannot see the break. Use a new autoinjector, and call 1-800-77-AMGEN (1-800-772-6436).
  • The autoinjector is not made with natural rubber latex.

For more information or help, contact your healthcare provider, visit www.aimovig.com or call 1-800-77-AMGEN (1-800-772-6436).

Step 1: Preparing to inject AIMOVIG

1A. Remove the autoinjector from the carton.

Carefully lift the autoinjector straight up out of the carton.

Before you inject, always check the label of the autoinjector to make sure you have the correct medicine and the correct dose of AIMOVIG.

Wait at least 30 minutes for the autoinjector to reach room temperature before injecting.

This is important for administering the entire dose and helps minimize discomfort. AIMOVIG may take longer to inject if it has not reached room temperature. Do not heat the autoinjector. Let it come to room temperature naturally.

Remove the autoinjector from the carton - Illustration
  • Do not put the autoinjector back in the refrigerator after it has reached room temperature.
  • Do not try to warm the autoinjector by using a heat source such as hot water or microwave.
  • Do not leave the autoinjector in direct sunlight.
  • Do not shake the autoinjector.
  • Do not remove the orange cap from the autoinjector yet.

1B. Inspect the AIMOVIG SureClick autoinjector.

Yellow safety guard (needle inside)

Yellow safety guard - Illustration

Make sure the medicine in the window is clear and colorless to slightly yellow.

  • Do not use the autoinjector if the medicine is cloudy or discolored or contains flakes or particles.
  • Do not use the autoinjector if any part appears cracked or broken.
  • Do not use the autoinjector if the autoinjector has been dropped.
  • Do not use the autoinjector if the orange cap is missing or not securely attached.
  • Do not use the autoinjector if the expiration date printed on the label has passed.

In all cases, use a new autoinjector, and call 1-800-77-AMGEN (1-800-772-6436).

1C. Gather all materials needed for your injection.

Wash your hands thoroughly with soap and water.

On a clean, well-lit work surface, place the:

  • New autoinjector
  • Alcohol wipes
  • Cotton balls or gauze pads
  • Adhesive bandages
  • Sharps disposal container (see Step 4: Finish)
Sharps disposal container - Illustration

1D. Prepare and clean your injection site.

Only use these injection sites:

  • Thigh
  • Stomach (abdomen), except for a 2 inch area right around your navel (belly button)
  • Outer area of upper arm (only if someone else is giving you the injection)

Clean your injection site with an alcohol wipe. Let your skin dry.

  • Do not touch this area again before injecting.
  • Do not inject into areas where the skin is tender, bruised, red, or hard. Avoid injecting into areas with scars or stretch marks.
  • Avoid injecting directly into raised, thick, red, or scaly skin patch or lesion.
Clean your injection site with an alcohol wipe - Illustration

Step 2: Get ready

2A Pull the orange cap straight off, only when you are ready to inject.

Do not leave the orange cap off for more than 5 minutes. This can dry out the medicine.

Pull the orange cap straight off, only when you are ready to inject - Illustration-Aimovig

It is normal to see a drop of liquid at the end of the needle or yellow safety guard.

Do not twist, bend, or wiggle the orange cap.

Do not put the orange cap back onto the autoinjector.

Do not put fingers into the yellow safety guard.

Do not remove the orange cap from the autoinjector until you are ready to inject.

If you are unable to inject, pleaes contact your healthcare provider.

2B. Create a firm surface at the selected injection site (thigh, stomach, or outer areas of the upper arm), by using either the Stretch method or the Pinch method.

Stretch Method

Stretch Method - Illustration

Stretch the skin firmly by moving your thumb and fingers in opposite directions, creating an area about 2 inches wide.

Pinch Method

Pinch Method - Illustration

Pinch the skin firmly between your thumb and fingers, creating an area about 2 inches wide.

Important: Keep skin stretched or pinched while injecting.

Step 3: Inject

3A. Keep holding the stretched or pinched skin. With the orange cap off, put the yellow safety guard on your skin at 90 degrees. The needle is inside the yellow safety guard. Do not touch the gray start button yet. Â

Keep holding the stretched or pinched skin - Illustration

3B Firmly push down the autoinjector onto skin until the autoinjector stops moving.

Firmly push down the autoinjector onto skin until the autoinjector stops moving - Illustration

Important: You must push all the way down but Do not touch the gray start button until you are ready to inject.

3C. When you are ready to inject, press the gray start button. You will hear a click.

When you are ready to inject, press the gray start button. You will hear a click - Illustration

3D. Keep pushing the autoinjector down on your skin. Then lift your thumb while still holding the autoinjector on your skin. Your injection could take about 15 seconds to complete.

Keep pushing the autoinjector down on your skin - Illustration

Note: After you remove the autoinjector from your skin, the needle will be automatically covered.

After you remove the autoinjector from your skin, the needle will be automatically covered - Illustration

Important: When you remove the autoinjector, if the window has not turned yellow, or if it looks like the medicine is still injecting, this means you have not received a full dose. Call your healthcare provider immediately.

Step 4: Finish

4A. Throw away the used autoinjector and the orange cap.

 

 

Throw away the used autoinjector and the orange cap - Illustration

Put the used autoinjector and orange cap in an FDA-cleared sharps disposal container right away after use. Do not throw away (dispose of) the autoinjector or orange cap in your household trash.

If you Do not have an FDA-cleared sharps disposal container, you may use a household container that is:

  • Made of a heavy-duty plastic,
  • Can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out,
  • Upright and stable during use,
  • Leak-resistant, and
  • Properly labeled to warn of hazardous waste inside the container.

When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state that you live in, go to the FDA’s website at: http://www.fda.gov/safesharpsdisposal.

Do not dispose of your used sharps disposal container in your household trash unless your community guidelines permit this. Do not recycle your used sharps disposal container.

  • Do not reuse the autoinjector.
  • Do not recap the autoinjector or put fingers into the yellow safety guard.

Important: Always keep the sharps disposal container out of the reach of children.

4B. Check the injection site.

If there is blood, press a cotton ball or gauze pad on your injection site. Apply an adhesive bandage if needed.

Do not rub the injection site.

Commonly asked questions

What will happen if I press the gray start button before I am ready to do the injection on my skin?

Even when you press the gray start button, the injection will only happen when the yellow safety guard is also pushed into the autoinjector.

Can I move the autoinjector around on my skin while I am choosing an injection site?

It is okay to move the autoinjector around on the injection site as long as you do not press the gray start button. However, if you press the gray start button and the yellow safety guard is pushed into the autoinjector, the injection will begin.

Can I release the gray start button after I start my injection?

You can release the gray start button, but continue to hold the autoinjector firmly against your skin during the injection.

Will the gray start button pop up after I release my thumb?

The gray start button may not pop up after you release your thumb if you held your thumb down during the injection. This is okay.

What do I do if I did not hear a second click?

If you did not hear a second click, you can confirm a complete injection by checking that the window has turned yellow.

Whom do I contact if I need help with the autoinjector or my injection?

A healthcare provider familiar with AIMOVIG should be able to answer your questions. For more information, visit www.aimovig.com or call 1-800-77-AMGEN (1-800-772-6436).

AIMOVIG®
(AIM-oh-vig) (erenumab-aooe) injection, for subcutaneous use

What is AIMOVIG?

AIMOVIG is a prescription medicine used for the preventive treatment of migraine in adults.

It is not known if AIMOVIG is safe and effective in children under 18 years of age.

Who should not use AIMOVIG?

Do not use AIMOVIG if you are allergic to erenumab-aooe or any of the ingredients in AIMOVIG. See the end of this Patient Information for a complete list of ingredients in AIMOVIG.

Before you start using AIMOVIG, tell your healthcare provider about all your medical conditions, including if you are:

  • Pregnant or plan to become pregnant. It is not known if AIMOVIG will harm your unborn baby.
  • Breastfeeding or plan to breastfeed. It is not known if AIMOVIG passes into your breast milk. Talk to your healthcare provider about the best way to feed your baby while using AIMOVIG.

Tell your pharmacist or healthcare provider about all the medicines you take, including any prescription and over-the-counter medicines, vitamins, or herbal supplements.

How should I take AIMOVIG?

  • See the detailed “Instructions for Use” on complete information on how to take AIMOVIG.
  • Take AIMOVIG exactly as your healthcare provider tells you to take it.
  • Before you inject, always check the label of your single-dose prefilled autoinjector or single-dose prefilled syringe to make sure you have the correct medicine and the correct dose of AIMOVIG.
  • Also, before you inject, leave AIMOVIG at room temperature for at least 30 minutes protected from direct sunlight.
  • AIMOVIG is injected under your skin (subcutaneously) 1 time each month.
  • AIMOVIG comes in 2 different types of devices: a single-dose (1 time) prefilled autoinjector or a single-dose (1 time) prefilled syringe. Your healthcare provider will prescribe the type and dose that is best for you.
  • If you forget to take AIMOVIG or are not able to take the dose at the regular time, take your missed dose as soon as you remember. After that, you can continue to take AIMOVIG 1 time each month from the date of your last dose.

What are possible side effects of AIMOVIG?

AIMOVIG may cause serious side effects, including:

  • Allergic reactions. Allergic reactions, including rash or swelling can happen after receiving AIMOVIG. This can happen within hours to days after using AIMOVIG. Call your healthcare provider or get emergency medical help right away if you have any of the following symptoms of an allergic reaction:
    • swelling of the face, mouth, tongue, or throat
    • trouble breathing
  • Constipation with serious complications. Severe constipation can happen after receiving AIMOVIG. In some cases, people have been hospitalized or needed surgery. Contact your healthcare provider if you have severe constipation or constipation associated with symptoms such as severe or constant belly pain, vomiting, swelling of belly or bloating.
  • High blood pressure. High blood pressure or worsening of high blood pressure can happen after receiving AIMOVIG. Contact your healthcare provider if you have an increase in blood pressure.

The most common side effects of AIMOVIG include: pain, redness, or swelling at the injection site and constipation.

Tell your healthcare provider if you have any side effect that bothers you or that does not go away.

These are not all of the possible side effects of AIMOVIG. Ask your pharmacist or healthcare provider for more information.

Call your healthcare provider for medical advice about side effects. You may report side effects to the FDA at 1-800-FDA-1088. You may also report side effects to Amgen at 1-800-77-AMGEN (1-800-772-6436).

How should I store AIMOVIG?

  • Store AIMOVIG in the refrigerator between 36°F to 46°F (2°C to 8°C).
  • Keep AIMOVIG in the original carton. This will protect the medicine from light.
  • After removing AIMOVIG from the refrigerator, it can be stored at room temperature between 68°F to 77°F (20°C to 25°C) for up to 7 days.
  • Throw away AIMOVIG that has been left at room temperature for more than 7 days.
  • Do not freeze.
  • Do not shake.

Keep AIMOVIG and all medicines out of the reach of children.

General information about the safe and effective use of AIMOVIG.

Medicines are sometimes prescribed for purposes other than those listed in a Patient Information leaflet. Do not use AIMOVIG for a condition for which it is not prescribed. Do not give AIMOVIG to other people, even if they have the same symptoms that you have. It can harm them. You can ask your pharmacist or healthcare provider for information about AIMOVIG that is written for healthcare professionals.

What are the ingredients in AIMOVIG?

  • Active Ingredient: erenumab-aooe
  • Inactive Ingredients: acetate, polysorbate 80, and sucrose

AIMOVIG prefilled autoinjectors and prefilled syringes are not made with natural rubber latex.

AIMOVIG®
(AIM-oh-vig) (erenumab-aooe)

Injection, For Subcutaneous Use

Single-Dose Prefilled Syringe 70 mg/mL and 140 mg/mL Guide to parts

Single-Dose Prefilled Syringe 70 mg/mL and 140 mg/mL Guide to parts - Illustration

Important: Needle is inside the gray needle cap.

Important

Before you use AIMOVIG prefilled syringe, read this important information:

Storing your AIMOVIG prefilled syringe

  • Keep the syringe out of the reach of children.
  • Keep the syringe in the original carton to protect from light.
  • The syringe should be kept in the refrigerator at 36°F to 46°F (2°C to 8°C).
  • After removing AIMOVIG from the refrigerator, it can be stored at room temperature between 68°F to 77°F (20°C to 25°C) for up to 7 days.
  • Throw away AIMOVIG that has been left at room temperature for more than 7 days.
  • Do not freeze.

Using your AIMOVIG prefilled syringe

  • It is important that you do not try to give the injection unless you or your caregiver has received training from your healthcare provider.
  • Do not use a syringe after the expiration date on the label.
  • Do not shake the syringe.
  • Do not remove the gray needle cap from the syringe until you are ready to inject.
  • Do not use the syringe if it has been frozen.
  • Do not use a syringe if it has been dropped on a hard surface. Part of the syringe may be broken even if you cannot see the break. Use a new syringe, and call 1-800-77-AMGEN (1-800-772-6436).
  • The prefilled syringe is not made with natural rubber latex.

Step 1: Prepare

AIMOVIG comes as a single-dose (1 time) prefilled syringe. Your healthcare provider will prescribe the dose that is best for you.

Before you inject, always check the label of your single-dose prefilled syringe to make sure you have the correct medicine and the correct dose of AIMOVIG.

A. Remove AIMOVIG prefilled syringe from the carton.

Grab the syringe barrel to remove the syringe from the tray.

Place finger or thumb on edge of tray to secure it while you remove the syringe.

Grab the syringe barrel to remove the syringe from the tray - Illustration

Grab Here

Grab Here - Illustration

For safety reasons:

  • Do not grab the plunger rod.
  • Do not grab the gray needle cap.
  • Do not remove the gray needle cap until you are ready to inject.
  • Do not remove the finger flange. This is part of the syringe.

Leave the syringe at room temperature for at least 30 minutes before injecting.

  • Do not put the syringe back in the refrigerator after it has reached room temperature.
  • Do not try to warm the syringe by using a heat source such as hot water or microwave.
  • Do not leave the syringe in direct sunlight.
  • Do not shake the syringe.

Important: Always hold the prefilled syringe by the syringe barrel.

B. Inspect the AIMOVIG prefilled syringe.

Inspect the AIMOVIG prefilled syringe - Illustration

Always hold the syringe by the syringe barrel.

Make sure the medicine in the syringe is clear and colorless to slightly yellow.

  • Do not use the syringe if the medicine is cloudy or discolored or contains flakes or particles.
  • Do not use the syringe if any part appears cracked or broken.
  • Do not use the syringe if the syringe has been dropped.
  • Do not use the syringe if the gray needle cap is missing or not securely attached.
  • Do not use the syringe if the expiration date printed on the label has passed.

In all cases, use a new syringe, and call 1-800-77-AMGEN (1-800-772-6436).

C. Gather all materials needed for your injection.

Wash your hands thoroughly with soap and water.

On a clean, well-lit work surface, place the:

  • New syringe
  • Alcohol wipes
  • Cotton balls or gauze pads
  • Adhesive bandages
  • Sharps disposal container
On a clean, well-lit work surface, place the - Illustration-Aimovig

D. Prepare and clean your injection site.

Only use these injection sites:

  • Your thigh
  • Stomach area (abdomen), except for a two inch area right around your navel
  • Outer area of upper arm (only if someone else is giving you the injection)

Clean your injection site with an alcohol wipe. Let your skin dry.

  • Do not touch this area again before injecting.
  • Do not inject into areas where the skin is tender, bruised, red, or hard. Avoid injecting directly into raised, thick, red, or scaly skin patch or lesion, or areas with scars or stretch marks.
Clean your injection site with an alcohol wipe - Illustration-Aimovig

Step 2: Get ready

E. Pull gray needle cap straight out and away from your body, only when you are ready to inject. Do not leave the gray needle cap off for more than five minutes. This can dry out the medicine.

Pull gray needle cap straight out and away from your body, only when you are ready to inject - Illustration-Aimovig

It is normal to see a drop of liquid at the end of the needle.

  • Do not twist or bend the gray needle cap.
  • Do not put the gray needle cap back onto the syringe.
  • Do not remove the gray needle cap from the syringe until you are ready to inject.

Important: Throw the gray needle cap into the sharps disposal container.

F. Pinch your injection site to create a firm surface.

Pinch your injection site to create a firm surface - Illustration-Aimovig

Pinch skin firmly between your thumb and fingers, creating an area about two inches wide.

Important: Keep skin pinched while injecting.

Step 3: Inject

G. Hold the pinch. With the gray needle cap off, insert the syringe into your skin at 45 to 90 degrees.

 Hold the pinch. With the gray needle cap off, insert the syringe into your skin at 45 to 90 degrees - Illustration-Aimovig

Do not place your finger on the plunger rod while inserting the needle.

H. Place your finger on the plunger rod. Using slow and constant pressure, push the plunger rod all the way down until the prefilled syringe stops moving.

Place your finger on the plunger rod - Illustration-Aimovig

I. When done, release your thumb, and gently lift the syringe off of your skin.

When done, release your thumb, and gently lift the syringe off of your skin- Illustration-Aimovig

Important: When you remove the syringe, if it looks like the medicine is still in the syringe barrel, this means you have not received a full dose. Call your healthcare provider immediately.

Step 4: Finish

J. Discard the used syringe and the gray needle cap.

Discard the used syringe and the gray needle cap - Illustration-Aimovig

Put the used AIMOVIG syringe and gray needle cap in a FDA-cleared sharps disposal container right away after use. Do not throw away (dispose of) the syringe in your household trash.

If you do not have a FDA-cleared sharps disposal container, you may use a household container that is:

  • Made of a heavy-duty plastic
  • Can be closed with a tight-fitting, puncture-resistant lid, without sharps being able to come out
  • Upright and stable during use
  • Leak-resistant
  • Properly labeled to warn of hazardous waste inside the container

When your sharps disposal container is almost full, you will need to follow your community guidelines for the right way to dispose of your sharps disposal container. There may be state or local laws about how you should throw away used needles and syringes. For more information about safe sharps disposal, and for specific information about sharps disposal in the state that you live in, go to the FDA’s website at: http://www.fda.gov/safesharpsdisposal.

  • Do not reuse the syringe.
  • Do not recycle the syringe or sharps disposal container or throw them into household trash.

Important: Always keep the sharps disposal container out of the reach of children.

K. Examine the injection site.

If there is blood, press a cotton ball or gauze pad on your injection site. Do not rub the injection site. Apply an adhesive bandage if needed.

For more information, go to www.aimovig.com or call 1-800-77-AMGEN (1-800-772-6436).

This Instructions for Use has been approved by the U.S. Food and Drug Administration.

Read Next Article